Peel & Seal
David Delcoma
Peel & Seal - 101 Uses and Counting...

Peel & Seal® is so versatile, it can be used to waterproof almost anything and we have a list to prove it. Over the years, we've heard from customers around the globe telling us how they've used Peel & Seal in ways we never dreamed of. Just for fun, we thought we'd publish the uses we have received.

Peel & Seal - 101 Uses and Counting...

Blog Posts

Ultra HT Fire-Rated Underlayment Saving Homes One Roof at a Time

Ultra HT Fire-Rated Underlayment Saving Homes One Roof at a Time

Learn more about our Ultra HT Wind & Water Seal underlayment and the fire-ratings associated with this steep-slope, self-adhering underlayment.

Things to Avoid When Using SBS-Modified Products

Things to Avoid When Using SBS-Modified Products

Learn the things you should avoid when using SBS-Modified construction materials on the job site. Save yourself a lot of heartache and mess by following these simple rules of using SBS self-adhering membranes.

The Beginning of FutureFlash

The Beginning of FutureFlash

Learn how the devastation of El Nino in California led to the development of FutureFlash, a mechanically-attached waterproofing membrane used extensively on the West Coast. An interesting read for sure.

Ultra HT - Let's Go Vertical!

Ultra HT - Let's Go Vertical!

Ultra HT Wind & Water Seal can be used in vertical applications behind metal panel sidewall systems or metal-capped parapet walls where high heat is generated. Learn more about this specialized application.

Helpful Tips for Installing Self-Adhered Roofing Underlayments

Helpful Tips for Installing Self-Adhered Roofing Underlayments

Installing a self-adhering roofing underlayment takes some know-how and MFM offers these valuable tips for a proper installation.

The Keys to Installing MFM Roof Deck Tape

The Keys to Installing MFM Roof Deck Tape

Roofing codes are changing and one of those changes has been the requirement to seal the seams of the roof deck panels. Whether it is code or not, you’ll want to learn more about how to properly install MFM Roof Deck Tape for maximum waterproofing protection on your next project.

,

Why You Need to Consider Shingle Starter™ for your Shingled Roof Installation

,
Why You Need to Consider Shingle Starter™ for your Shingled Roof Installation

Waterproofing along the roof edge is a critical area that is prone to wind-driven rain getting under the shingles, which leads to wood rot. ShingleStarter was developed to protect this area with a unique approach to seal out this area to the elements.

,

Introducing DeckWrap PowerBond for Superior Deck Protection

,
Introducing DeckWrap PowerBond for Superior Deck Protection

MFM is proud to introduce DeckWrap™ PowerBond™ - a new, highly aggressive waterproofing membrane to protect decks and posts from premature rot and degradation.

MFM PowerBond™ Adhesive Advantages Over Butyl-Based Adhesives

MFM PowerBond™ Adhesive Advantages Over Butyl-Based Adhesives

Learn how the MFM PowerBond™ Adhesive System can help you install products in colder temperatures, while still realizing savings over comparable butly-based adhesive products. Same performance characteristics at a much lower price point to save material costs on your project.

,

Recessed Windows and Stucco - the Best Way to Waterproof

,

FutureFlash® is a specially designed waterproofing membrane for use with stucco buildings. It is a patented product which as of today, has yet to experience a failure on the jobsite. Read more about this very unique product...

,

Tiling Your Outdoor Balcony or Deck? Remember the Waterproofing...

,
Tiling Your Outdoor Balcony or Deck? Remember the Waterproofing...

A growing trend is turning previously unusable outdoor living space into an oasis complete with tile, torches and plenty of smiles. You may also be contemplating installing tile or stone in place of or over traditional concrete. Many of these projects include upgrading an exterior balcony, patio or flat roof spaces above a garage or sunroom. 

,

AAMA 711 - What Does It Mean?

,
AAMA 711 - What Does It Mean?

Building Codes are a part of every construction project. They affect the builder, distributor, manufacturer and building owner in one way or another. Until recently,specific codes had not been established for the group of building products commonly know as "window flashing tapes." 

,

Ultra HT Wind & Water Seal™ - Takes the Heat of Metal Roofing Systems!

,
Ultra HT Wind & Water Seal™ - Takes the Heat of Metal Roofing Systems!

When it comes to installing metal roofing systems, contractors need to be aware of the high heat generated under these systems for total roof protection. Unless the underlayment installed is rated for high temperature applications, you could run into troubles down the road.

,

WindowWrap PowerBond for Cold Weather Installations

,
WindowWrap PowerBond for Cold Weather Installations

When the temperature drops and you have windows to flash, MFM provides two excellent products designed for these cold weather applications. WindowWrap PowerBond and WindowWrap Flex PowerBond are specifically designed to flash windows and doors in temperatures as low as 25°F (-4°C). 

,

Practical Tips for Installing Underlayments in Cool Weather

,
Practical Tips for Installing Underlayments in Cool Weather

MFM Building Products produces a number of self-adhering, or self-stick, underlayments that typically have a minimum installation temperature. In general, MFM recommends installing its roofing underlayments in fair weather at temperatures at 50°F (10°C). 

,

Building a New Deck? Don't Forget This Option.

,
Building a New Deck? Don't Forget This Option.

Stone pavers, stamped concrete, fieldstones and even brick, but nothing seems more American than a great deck to fire up the grill and enjoy your backyard. According to NADRA, more than 2.5 million new or replacement decks were constructed just last year. That's a lot of decks! 

,

Installing Asphalt Shingles? Save a Step and Some Money!

,
Installing Asphalt Shingles? Save a Step and Some Money!

Roofing contractors for years have relied on cutting 3 tab shingles down to make a starter course when installing an asphalt shingle roof. Not only is this a waste of expensive shingles, but the time it takes to complete this process is a costly one.

To Prime or Not to Prime...That is the Question

To Prime or Not to Prime...That is the Question

The headline says it all. And builders, whether the more experienced contractor, manufacturer, or dealer, should be asking this question. Priming the surface can be a critical step in the success or failure of the waterproofing membrane being installed.

,

WindowWrap - Let's Wrap This Up Right...and Airtight!

,
WindowWrap - Let's Wrap This Up Right...and Airtight!

Recently, a friend of the industry shared with me a project he was on for Habitat for Humanity. An experienced contractor that years of experience installing windows, he told me that most of the volunteers had never heard of window flashing tape. It’s one of those products that is not seen...