MFM-Building-Products-Pee-and-Seal.png
 

Peel & Seal® is the original, self-stick roll roofing specifically designed for low slope residential and commercial applications. Composed of an exclusive formula (consisting of laminated aluminized foil, high-density polymer films and a thick layer of rubberized asphalt), Peel & Seal® provides a long lasting, durable, maintenance-free roofing surface.

From dormers, residential sunroom additions, “open” porches, and mobile home roofs, to industrial and agricultural buildings where low slope roofs are common place, Peel & Seal® is an excellent solution for these applications. The self-adhering, weatherproof, reflective surface not only forms a highly effective barrier to the elements, but also limits solar heating to help keep the temperature of building interiors significantly cooler.

Peel & Seal - Installation (small).jpg

PEEL & SEAL® FEATURES

  • Single-ply, direct-to-deck installation
  • No torches, mops, glues or fasteners required
  • Designed to be left exposed indefinitely to the elements
  • Maintenance-free, tough, durable aluminum surface
  • Adhesive system will not crack or dry-out
  • Surface reflects heat keeping internal temperatures cooler
  • Available in four color options and seven width sizes

peel & seal® Approvals

  • ASTM D 1970
  • ICC-ES ESR 1654
  • Florida Building Code FL# 11842.2, 13025.1, 13025.2
  • Miami-Dade County Approved
  • UL® Classified Prepared Roofing Accessory
  • Texas Department of Insurance Accepted RC38

Peel & Seal® is compatible with EPDM roofing systems by utilizing an MFM-approved EPDM primer. 

Peel & Seal® is perfect for hundreds of uses ranging from full-roof applications to patching gutters and vent pipes. Fully pliable and providing a secure seal at edges, corners and over gaps, it is ideal for roof areas that are often difficult to waterproof, including locations where ducts, vents, chimneys, or air conditioning units either protrude through, or are roof mounted.

Peel & Seal® – the original, maintenance-free, energy efficient, economical, self-sealing roll roofing you can count on for any low slope/low pitch application.

Peel & Seal® carries a 10-Year Warranty.

Peel & Seal® Shrink-Wrapped

ProductProduct IDSizeUnits/CartonCarton Wt.
Aluminum500439” x 33.5’433 lbs
500426” x 33.5’633 lbs
500414” x 33.5’933 lbs
White50W439” x 33.5’433 lbs
50W426” x 33.5’633 lbs
50W414” x 33.5’933 lbs

Peel & Seal®

ProductProduct IDSizeUnits/CartonCarton Wt.
Aluminum5003636” x 33.5’133 lbs
5001818” x 33.5’233 lbs
5001212” x 33.5’333 lbs
500099” x 33.5’433 lbs
500066” x 33.5’633 lbs
500044” x 33.5’933 lbs
500033” x 33.5’1233 lbs
White50W3636” x 33.5’133 lbs
50W1818” x 33.5’233 lbs
50W1212” x 33.5’333 lbs
50W099” x 33.5’433 lbs
50W066” x 33.5’633 lbs
50W044” x 33.5’933 lbs
50W033” x 33.5’1233 lbs
Granite Gray50G3636” x 33.5’133 lbs
50G1818” x 33.5’233 lbs
50G1212” x 33.5’333 lbs
50G099” x 33.5’433 lbs
50G066” x 33.5’633 lbs
50G044” x 33.5’933 lbs
50G033” x 33.5’1233 lbs
Almond50A3636” x 33.5’133 lbs
50A1818” x 33.5’233 lbs
50A1212” x 33.5’333 lbs
50A099” x 33.5’433 lbs
50A066” x 33.5’633 lbs
50A044” x 33.5’933 lbs
50A033” x 33.5’1233 lbs